8:30 AM - 6:00 PM
Original price was: $92,100.00.$89,000.00Current price is: $89,000.00.
Heavy-duty gantry · High rigidity · Zero manual finishing
Heavy-duty gantry · High rigidity · True 5 axis RTCP control
Stop adapting your process to the machine. This 5 axis CNC router is purpose-built for:
Designed for industrial-scale mold production with sub-millimeter accuracy and zero-rework surface finish.
The Challenge:
Foam mold machining often causes tearing, melting, and fraying during high-speed cutting.
The Solution:
Result:
Clean edges, no melting, minimal manual finishing.
The Challenge:
High-density epoxy tooling board (up to 1200kg/m³) creates micro-vibration and chatter marks.
The Solution:
Result:
Mirror-like surface finish, reducing post-processing by up to 80%.
5-axis linkage with Hiteco spindle suppresses micro-vibration. Achieving mirror-like surfaces on high-density automotive tooling board without chatter marks.
The Challenge:
Fiberglass and carbon fiber cause tool wear, delamination, and poor edge quality.
The Solution:
Result:
Clean trimming, no fiber breakout, continuous surface accuracy.
5-axis CNC trimming a multi-layer fiberglass composite mold edge without fiber breakout.
Maintains consistent tool position and speed across complex surfaces.
Benefits:
Utilizing the Renishaw High-Precision Probe, we perform active kinematic calibration on every machine. This creates a real-time compensation matrix for the 5-axis Rotating Tool Center Point (RTCP).
Processes large toolpaths smoothly without stopping.
Benefits:
Precision honeycomb machining. If it can handle Nomex, it can handle any composite plug.
Every machine is calibrated to maintain 5 axis accuracy.
Benefits:
| Feature | Traditional 3-Axis + Manual | BCAM Industrial 5-Axis CNC |
| Setup Errors | High (Multi-setup alignment risks) | Single Setup (Zero alignment errors) |
| Surface Finish | Step-marks (10+ days of sanding) | Direct-to-Polish (Continuous curves) |
| Accuracy | 3mm – 6mm deviation on curves | Sub-millimeter (0.05mm precision) |
| Material Range | Limited (Mainly flat sheets) | Foam, Epoxy, Carbon Fiber, Honeycomb |
| Labor Cost | High (Army of manual sanders) | Low (Machine-finished surfaces) |
We are not just providing a machine — we deliver a complete machining solution for foam, epoxy and composite molds.
Send your material and get a test cutting report.
Talk to our engineers about your mold project today.
👉 Get Quote Now
👉 Request Test Cutting
👉 Contact Application Engineer
Not sure if it fits your material?
Send us your foam, epoxy or composite sample — we provide free test cutting with video report.
Customers Say – Don’t take our words as everything. Find out what customers say about our products and services they have purchased, owned or experienced.
As a first-time CNC user, I was initially daunted by the learning curve—but the BCAMCNC ATC CNC Router quickly proved to be the ideal machine to start my journey. Its heavy-duty construction delivers exceptional rigidity, far surpassing standard CNC routers, which translates to cleaner cuts and smoother operation, especially in metalwork.
Upgraded from a 2020 model to the BCM-2030D. The dual-spindle design lets us engrave and cut simultaneously. Dust extraction ports are perfectly placed. Our woodworking shop’s productivity jumped by 40%. BCAMCNC’s 24/7 support is a lifesaver!
The robotic arms in our production line handle 4’x8′ MDF sheets with flawless precision, enabling seamless material handling around the clock. Thanks to this automation, our night shift now operates entirely unattended—boosting productivity while reducing labor costs. The 5+4 drilling head configuration has revolutionized our cabinet manufacturing process, delivering unmatched speed and accuracy for complex drilling patterns. BCAMCNC went above and beyond by customizing their CNC software to integrate perfectly with our ERP system, ensuring real-time data synchronization and streamlined workflow management.
I wanted a CNC router for woodworking, as well as a drag knife for cutting foam, cardboard, rubber, and some sealing materials, so I ordered the BCM2030C and so I did not have to purchase two machines. So far everything is running as expected. The only issue was the controller switching, so I reached out to BCAMCNC tech support and they were responsive and did an excellent job of diagnosing and debugging the software in a timely fashion.
The BCM-1325SA manual-change CNC router delivers exceptional efficiency for custom furniture joints, proving that advanced automation isn’t always necessary. Its ergonomic tool rack is positioned right beside the workspace, eliminating wasted movement and maximizing productivity. Despite costing $8K less than auto-change models, it maintains impressive ±0.2mm accuracy—ideal for precision woodworking. This balance of cost savings, thoughtful design, and reliability makes it a standout choice for small to mid-scale furniture production.
We’ve been running the BCAMCNC edge bander in our mid-sized cabinet shop for about 5 months now. It’s not perfect – we had to tweak the glue temperature settings for thicker ABS edges – but once dialed in, it’s been solid. The automatic corner trimming works about 90% of the time (still needs occasional manual touch-ups on tricky curved pieces). What really stands out is the build quality – no loose components after daily 8-hour shifts like we experienced with our previous machine. For the price point, it’s been a reliable workhorse that’s cut our edge banding time by nearly half
The BCAM CNC Router has completely elevated our custom furniture production! Its precision carving brings even the most intricate oak and MDF designs to life with flawless detail, while the industrial-grade vacuum table ensures razor-thin panels stay perfectly stable during machining. The integrated dust extraction system has revolutionized our workspace – no more post-job cleanups or airborne particles. Whether we’re crafting high-end cabinetry or delicate decorative inlays, this machine delivers museum-quality results every time. An absolute game-changer for woodshops serious about quality and efficiency!
Perfect for sign-making! The 15kW spindle powers through 50mm acrylic without chipping. The auto-calibration feature is genius and the 12-tool magazine handles all our bits. BCAMCNC shipped it with spare parts (belts, nozzles) which was a nice touch.
Our workshop specializes in carbon steel and aluminum fabrication, and the BCAMCNC fiber laser cutter has exceeded expectations! It delivers razor-sharp cuts on 1-20mm carbon steel and 0.5-15mm aluminum with impressive speed (±0.05mm precision). The intuitive interface reduced operator training time by 40%, while the sealed cutting head minimizes oxidation on aluminum. Maintenance is surprisingly simple – just weekly lens cleaning. After 6 months of heavy use, it remains our most reliable investment for aerospace-grade results.
Finally, a 5-axis that understands wood! The F-PTP’s low-RPM/high-torque spindle prevents walnut tear-out, and the dust extraction ports are RIGHT where chips fly. We produce Baroque-style chair legs with undercuts in one setup. BCAMCNC even sent custom clamping jigs for our odd-shaped blanks.
Original price was: $93,154.00.$89,000.00Current price is: $89,000.00.
Original price was: $9,874.52.$9,065.49Current price is: $9,065.49.
Original price was: $91,154.00.$89,000.00Current price is: $89,000.00.
Tellus gravida ipsum aut facilisis tempus at et aliquam estsem.
Non pulvinar aenean ultrices lectus vitae imperdiet vulputate a eu.
Aliquet ullamcorper leo mi vel sit pretium euismod eget libero.
Nullam iaculis vestibulum arcu id urnain pellentesque volutpat quis.
Subscribe and grab 20% OFF!
© 2025 Jinan Bcamcnc Machinery Co., Ltd. (BCAMCNC)
Reviews
There are no reviews yet.